Demineralization Water Plants


Price : INR 600,000.00 / Set(s)


Demineralization Water Plants


Principle of Operation :
A Typical two-bed DM Plant consists of two MS Rubber lined Pressure vessels connected in series along with its internal fittings. The first unit consists of high capacity strongly acidic cation exchange resin, which converts positive ions of salt and replaces them with hydrogen ions to form respective acids, which are absorbed in next vessel by strongly basic anion exchange resin. The water obtained by this process shows conductivity less than 20 µ S / cm at 25 Deg C and total dissolved solids less than 10 ppm.

Further high purity water can be achieved by Mixed Bed Deionisers, which are designed to produce high purity treated water. They can be used as polishing units after two bed DM Plant to obtain high purity water. Mixed Bed Deionisers are single column units, filled with strongly acidic cation and strongly basic anion exchange resins mixed together.

 

There are four distinct stages in the operation of Deionisers

  • Service
  • Backwashing
  • Regeneration
  • Rinse/remix

 

Service :
In the Service cycle the water enters the vessel and passes through the Resin bed of the respective exchanger.

Backwashing :
After the resins are exhausted, the bed is backwashed. Backwashing is carried out by a uniform upward flow of water through the resin bed. The backwash step expands the resin bed releasing any entrapped particulate matter & removes the channeling in the resin column if occurred during the service cycle.

Regeneration :
When the ion exchange resins loose all the exchangeable ions, they require regeneration to restore them back to hydrogen or hydroxyl form depending upon whether they are cation or anion resins. To achieve this 4 - 5% concentrated solution of Hydrochloric acid is used for cation resin and a 4% - 5% concentrated solution of caustic soda for anion resin.

Rinse :
The final stage of regeneration is to rinse the resins of excess regenerant

 


Specifications

Use Treating Hard Water
Features Long functional life
Performance Optimum
Advantage Easy to Operate
Speciality Rust resistance
Benefit Excellent Result


Technical Details

Item MOC Service
EJECTOR MS with Ebonite / PP / HDPE lined For ACID / Caustic Resin / carbon charging
Fume Absorbers PP with FRP Coated Acid storage and measuring Tanks
Acid Proof level Gauges Polyproelyne Acid / caustic storage tanks/measuring tanks
MSRL PIPES HARD / Soft rubber lined For corrosive service
HDPE Lined MS Pipes MS + HDPE For corrosive service
PP lined steel pipes MS + PP For corrosive service
MSRL and Rubber covered Measuring Tanks MS with rubber lined and rubber covered Acid / Caustic
Middle collector Headers Rubber line & Rubber covered Stainless steel SAC / SBA/MB
Laterals Stainless steel / PVC / PP SAC / SBA / MB
Lateral Strainers Polyproelyne SAC / SBA / MB
Single Decker & Double Decker Strainers Polyproelyne Bottom collecting for SAC / SBA / MB
Resin Traps SS 316 with fine SS wire mesh SAC / SBA / MB

Dm Plant. Capacity: 3 X 45 M3/hr Installed At Essar Steel Ltd., Gujarat.

DM Plant Spares - We supply following spares for DM Plants.


DM plant. Capacity: 2 x 15 m3/hr installed at essar power ltd., gujarat


M. S. Ebonite lined (ratio - 1:1) ventury ejector assembly.


M. S. Ebonite lined (ratio - 1:5) ventury ejector assembly body material.




Looking for Product Name ?